Home / News (Page 2)
  • Useful Tips When Injection Molding Machine Robots Having a Problem

    1. The signal of "Robot arms move up" appears abnormally Tips and solution: Check if the wires are loose,check if sensory switch is working normally. 2. Proximity switch is too far away from sensory metal Tips and solution: Adjust the distance betwee...

  • Tips on Swing Arm Robots Maintenance

    1. WATCH THE ROBOT CYCLE One of the keys to keeping swing arm robots in good condition involves simply watching and listening, which can reveal a lot about the robot's general condition. As the robot runs through its motions, listen for any unusual s...

  • What Should be Noticed When Installing Hot Runner?

    Precautions for hot runner installation: 1. Place the mold, lay the upper mold flat, and clean all the holes and templates with the air gun. 2. Check the size of each hole, focus on the depth and remove burrs on the template. At the same time, check ...

  • Installation and maintenance of injection molding machine robot arm - part two

    4: Pneumatic system Including the multi-axis servo drive, as long as there is a wrist rotation and vacuum gripping action, almost all robot arms will have pneumatic functions. Pay close attention to the suction cup of the filter regulator valve unit....

  • Installation and maintenance of injection molding machine robot arm - part one

    The reasons for the failure of the automated robot arm may be that most of the joint parts of the robot arm are fixed by screws, which may be loosened due to long-term vibration, causing the robot arm to fall apart and the connecting blocks of the co...

  • Application of Industrial Manipulator

    Social demand for industrial manipulators is still very strong, and it has maintained a relatively high growth rate. In the next decade, global average sales of industrial manipulators will remain its growth at a rate about 12%. Now the application o...

  • Industrial robot arm for production automation

    With the rapid development of industry and fierce competition in the market, more and more manufacturing factories have moved from manual labor to semi-automated and automated development, thereby, improving manufacturing efficiency and reducing labo...

  • An Introduction to a Belt Conveyor

    A belt conveyor is a mechanical device, driven by friction to transport materials continuously. It can be used to form a material conveying process from the feed point to the emptying point on a certain conveyor line. And it can be an ideal choice fo...

Contact Us