+86-0572-6559837
1. Check if the injection machine is functioning normal: open mold, close mold, thimble out, safety door and so on. 2. (If the injection machine fixed platen already have holes, this step can be ignored) Drill holes: Close the mold before start. Put ...
After the 3-axis robot is installed on injection molding machine, then we need to connect the 3-axis robot with the injection machine: 1. Connect the wires: Turn off the power of injection machine. Classify the wires and tie them together accordingly...
Problem: The injection machine don't lock the mold while using 3-axis robot arm automatically Reason 1: 3-axis robot arm turned off the switch of mold locking. Solution: Open and close the safety door - one time. Reason 2: 3-axis robot alarm. Solutio...
Problem: Fail to suck products occasionally Reason 1: The air pipe is folded,the air can not go through. Solution: Dredge the pipe, or replace the damaged pipe. Reason 2: The air pipe or pipe connector is leaking air. Solution: Replace the air pipe o...
No matter what we want, we expect longer lifetime, less trouble. Let's take our cell phone as an example, while using it, we expect longer lifetime, less battery consumption and faster speed. Believe that regardless of the robot or injection molding ...
With the development of China's plastics industry, the annual growth rate of China's plastics machinery industry in recent years is about 30% profit growth is also much higher than the growth of industrial output value, China's machinery industry has...
With the rapid development of plastic processing industry in China, injection molding machine robot automation is getting more and more popular. Modern injection molding machines are often equipped with robots to improve production efficiency. The in...
Firstly, robot can fix the whole cycle time. If the plasticizing time, injection time, holding time, cooling time and switch mold time are the same, the yield can be improved. Also, factories can arrange production according to this time schedule. Se...
Copyright © Jingbei Technology (Zhejiang) Co., Ltd. Rights Reserved. China Servo Injection Molding Robots Manufacturers
